Screw Extractor Set 4 PCS for Damaged Screw Remove and Stripped
Instructions for use
1.Select screw remover that is smaller than the damage screw.
counterclockwise make a deep hole in the damaged screw.
Use a drill to turn a hole deep enough in the middle of the screw head.
2.Take out the screw remover then reverse the screw extractor
3.Hand drill is turned counter clockwise slowly to drill,but do not use high speed drilling
1.The deeper the hole, the easier it is to remove the screw.
2. These bits are not intended for commercial removal of screws.
3. Place the device in a dry place so that it does not rust.
4. Don't use impact hammer gear!
5. Adjust to the slowest speed, less than 200RPM will be enough.
Your damaged screw remover set is backed by our highest quality promise.
100 satisfaction guarantee. We backed up the 60-day warranty (defection, accidental damage, dissatisfaction).
Material: H.S.S. tungsten carbide tip
Package: 4 Packs
Length: 50 mm/ 1.97 inch
1# Remove Diameter 3 5mm
2# Remove Diameter 4 8mm
3# Remove Diameter 5 10mm
4# Remove Diameter 6 12mm
- HIGH QUALITY: This screw extractor kit made from standard high speed steel and super hard titanium coated.The hardness is 63-65 HRC.Higher hardness than other brands extractors.
- SIZE: The stripped screw extractor set use for iron and steel screws with a diameter between 3 and 12mm. Easy extractors damaged screw and remove the most stubborn stripped, damaged, embedded, rusted and painted-over screws and bolts.
- USE:This speed out screw extractor work on Allen Bolts, Machine Screws, Lag Bolts, Wood Screws, Hex Bolts, Sheet Metal Screws, Rounded Bolts etc. And damaged screw remove and extractor.
- APPLICATION: This broken screw extractor set compatible with all brands of power drills and screwdriver handles tools.
- EASY TO CARRY: Our stripped screw extractor are provided with a waterproof box for easy carrying and prevent rusting.
Kitclan Damaged Screw Remover Set, Screw Remover and Extractor Kit, Easily Remove Stripped or Damaged Screws, Set of 4 Different Stripped Screw Removers for Removing All Kinds of Screws and Bolts
Kitclan Damaged Screw Extractor and Remover Set is made of High Speed Steel with 62 HRC hardness for long lasting performance. Within seconds, you can remove even the most stubborn of stripped, broken, damaged, embedded, rusted and painted-over screws and bolts from their attachment points with the greatest of ease.
1# Remove Diameter 35mm
2# Remove Diameter 48mm
3# Remove Diameter 510mm
4# Remove Diameter 612mm
- MATERIAL: Kitclan Damaged Screw Remover is made from high strength steel and tempered twice for extra hardness
- APPLICABILITY: Our screw extractor set works with any drill and any screw size or bolt, Great for stripped, broken, stuck or damaged and screw removal. It is good for all homeowners, woodworkers, mechanics, artists, hobbyists, etc
- DIFFERENT SIZE AND TYPE: This screw remover set itself comes with four different size bits so it can be used on any screw types/size
- EASY TO USE: Just two easy steps. Two-step drill bit and extractor in one tool. Multiple tools not required. Removes any stripped screw in 10 seconds or less
- FRIENDLY CUSTOMER SERVICE: Any questions or if there is any problem with this product, you are welcomed to contact Kitclan, and we are ready to respond within 24 hours
Ontel SpeedOut Damaged Screw Extractor & Bolt Extractor Set
Removes any stripped screw or broken bolt, including Phillips, flat, hex, or painted, in 10 seconds or less. 3 easy steps: drill out, flip bit, extract. Durable hardened steel construction. Works with any drill and is quick and easy to use. Self-centering tip prevents walking. Compatible with Quick connect chuck systems. Great for carpenters, mechanics, do-it-yourselfers, boat owners and hobbyists. Set includes a durable storage case. The product is manufactured in United states.
- Made of good quality products
- Select propellants that deliver consistent accuracy and performance
- Product is manufactured in United States
Irwin Tools Hanson 53227 Hex Head Multi-Spline Screw Extractor Set, 25 Piece
The IRWIN HANSON Hex Head Multi-Spline Screw Extractor Set, 25 Piece, features an aggressive left hand design for extra gripping power. Easy out style spiral flutes embed themselves deeper into the metal as the tool is turned so grip increases as resistance increases. With sizes etched onto each tool for quick identification, it includes 25 hex head multispline extractors from 1/8"-78" and carrying case.
- VERSATILE: Remove broken studs, bolts, socket screws and fittings for high torque applications
- GRIPPING POWER: Aggressive left hand spiral design for extra gripping power
- EASY-OUT STYLE: Spiral flutes embed themselves to increase grip as resistance increases
- ETCHED SIZES: Extractor size and recommended drill bit size are etched on each tool
- 25-PIECE SET: Hex head multi-spline extractors from 1/8"-7/8" in heavy-duty carrying case
4PCS Damaged Screw Remover and Extractor Set by Fengbao - Stripped Screw Remover.
Stripped and Damaged Screw Extractor Set by Easy Out The must have tool for any handyman, car or boat mechanic, contractor, carpenter, woodworker, or anyone who constantly works with screws and bolts. You know how frustrating it can be to try to remove a broken or snapped screw head, stripped bolt, painted over deck screws and much more. 4 Piece Extractor Set with Storage Case Includes: 1) Removes screw size: 3-5mm 2) Removes screw size: 4-8mm 3) Removes screw size: 5-10mm 4) Removes screw size: 6-12mm Easily removes screw and bolt head types from flat head, phillips, hex, allen, torx, square, round and any other type of stripped screw or bolt you encounter. Quick and Easy to Use: First you want ensure that you are using a bit that is SMALLER than the screw you are trying to remove. That way it has enough room to drill a proper sized hole to extract. Slowly start to drill a hole into the screw head or bolt with the cutting size. This creates a cone shaped hole that makes it easy for the extractor head to grab onto Flip the drill bit to the extractor side. Reverse your drill and start slow to allow the threads to catch. Continue to screw or drill until the bolt or screw is fully removed And thats it! Within a matter of seconds you easily removed that broken screw without damaging any of your other tools or bits. The high strength steel bit does all the work for you Specs: High Speed Steel 4341 Hardness 63-65HRC 4 Piece Set with included storage case The Easy Out is the easiest and most reliable way to remove all your stubborn screws and bolts with ease
- APPLY TO ALL DRILLS : 4 pieces screw extractors work with any drill and all the screw size or bolt (3-12mm), These extractor tools are used to reverse the damaged screw counterclockwise until it is released
- POWERFUL : Striped screw extractor removes even the most stubborn stripped, damaged, embedded, rusted and painted-over screws and bolts
- EASY TO USE : Just two simple steps will get the job done - Use a suitable size screw remover to drill a hole with cutting size and it's easy to extract the screw or bolt using extractor tool
- HARDNESS 63-65HRC : Higher hardness material and is more durable than most screw extractors in market, the hardness and the durability are better than others, Buy with confidence and complete peace of mind
- WARRANTY : Tacklife stripped screw extractor is backed by our 3 Tier 100 Money Back Guarantee, If you are not satisfied with the product, you can return the product for a full refund without any hassle
Irwin Tools Hanson Screw Extractor and Drill Bit Set, 35 Piece, 11135ZR
Designed to remove broken studs, bolts, socket screws, and fittings, the IRWIN HANSON Screw Extractor and Drill Bit Set, 35 Piece, features an aggressive left hand design for extra gripping power. Easy out style spiral flutes embed themselves deeper into the metal as the tool is turned so grip increases as resistance increases. This handy set includes EX-1, EX-2, EX-3, EX-4, EX-5, EX-6, multi-spline extractors in sizes: 1/8", 5/32", 3/16", 7/32", 1/4", 9/32", 5/16", 11/32", 3/8", 13/32", 7/16, 15/32, 1/2"; and drill bits in sizes: 5/64", 7/64", 1/8", 5/32", 3/16", 7/32", 1/4", 9/32", 19/64", 5/16", 11/32", 3/8", 13/32", 7/16", 15/32", 1/2", and a plastic case.
- Removes broken studs, bolts, socket screws, and fittings
- Aggressive left hand design creates extra gripping power
- Easy out style spiral flutes embed themselves to increase grip as resistance increases
- Extractor sizes and recommended drill bit sizes etched on each tool
- Set includes 35 of the most commonly used extractors and drill bits and plastic case
ATE Pro Tool 8 piece Easy Out Screw Bolt Extractor Set
Large 8 piece Easy Out Screw and Bolt Extractor Set. This unit features: High Carbon steel construction, Extractor sizes: 5/32", 5/16", 1/4", 9/32", 7/16", 5/8", 15/16", Includes Blow molded case
- High Carbon steel construction.
- Extractor sizes: 5/32", 5/16", 1/4", 9/32", 7/16", 5/8", 15/16"
- Includes Blow molded case
- Removes broken screws easily
IRWIN HANSON Spiral Flute Screw Extractors, 6 Piece Set, 53545
The IRWIN HANSON Spiral Flute Screw Extractor Set, 6 Piece, features an aggressive left hand design for extra gripping power. Easy out style spiral flutes embed themselves deeper into the metal as the tool is turned so grip increases as resistance increases. With sizes etched onto each tool for quick identification, it includes EX-1, EX-2, EX-3, EX-4, EX-5, and EX-6 extractors.
- Designed to remove broken studs, bolts, socket screws, and fittings
- Aggressive left hand spiral design for extra gripping power
- Easy out style spiral flutes embed themselves to increase grip as resistance increases
- Extractor size and recommended drill bit size are etched on each tool
- Set includes spiral flute screw extractors sizes EX-1, EX-2, EX-3, EX-4, EX-5, and EX-6
Drill Hog 13 Pc NIOBIUM Left Hand Drill Bit Set Index Drill Bits USA
Drill Hog is proud to release the newest technology in left hand drill bits. These bits are left handed meaning the flutes run in the opposite direction (counter clockwise). Left hand drills are used to remove broken bolts, screws, and studs just like an easy out.
These drills are made from Niobium which has a melting point of 4,476 degrees Fahrenheit! These bits will drill through the toughest steel like truck frames, stainless steel, farm implements, spring steel, grade 8 bolts, and more!
- 1/16 to 1/4 by 1/64ths (Does not skip any sizes)
- Niobium Nb41 Steel
- Left Hand Thread (Flutes are Counterclockwise)
- Used for Removing Broken Bolt, Screws, and Studs
- Made by Drill Hog USA
Mainpoint Screw Extractor Broken Bolt Remover Drill Guide Bits Set With Holder Frame 11 Pieces
Apply In Removing The Broken Screw.
E#1 for 1/8"-1/4" (3-6mm)
E#2 for 1/4"-5/16"(6-8mm)
E#3 for 5/16"-7/16"(8-11mm)
E#4 for 7/16"-9/16"(11-14mm)
E#5 for 9/16"-3/4"(14-18mm)
Drill Bit Diameter: 5/64 Inch(2.0mm), 7/64 Inch(3.0mm), 5/32 Inch(4.0mm), 1/4 Inch(6.0mm), 19/64 Inch(7.0mm)
Included Components: 5 x Drill Bits 5 x Extractors 1 x Holder Frame 1 x Assortment Case
- 🔧 DESIGN CONCEPT: Designed to remove damaged, rusted or stripped screws, studs, bolts, fastener, metal water tap and water tube, etc.
- 🔨 HIGH QUALITY: Made from HSS carbon steel, tempered twice, hardness level is 62-63HRC.
- 🔧 EASY TO USE: Aggressive left handed(extractors) and righted handed(drill bits) spiral flute design for extra gripping power.
- 🔨 MULTIFUNCTIONAL: Drill bits can also be used to bore holes on wood, metal, plastic, brick and wall, etc.
- 🔧 KINDLY NOTE: In the vicinity of electric tools, please wear glasses boxes and protective clothing.
- The best long lasting nail polish
- What is the best top coat
- Alpine 6x9 component speakers
- Professional stud finder
- Jet bandsaw review
- Designer luggage